Jerrycan, Type 4, 20L, plastic foldable
Overview
Specifications | |
---|---|
Item code | 1100000024 |
Unit weight | 270g +/- 5% |
Material group | NFI-JCAN |
- Square or rectangular shape collapsible jerrycan for household water collection and storage.
- For emergency situations only.
- To be stored in a dry area and shielded from sun.
- Shelf life: 10 years when kept in original packaging between -10°C and 50°C.
Jerrycan (front)
Jerrycan (side)
Jerrycan
Description
Jerrycan - Plastic - Foldable - 20L | |
---|---|
Capacity | 20L |
Weight | 270g +/- 5% for the 20L type |
Material | Manufactured of food grade LDPE should not contain toxic elements according to EN 1186 & EN 13130 and shall comply with Regulation (EU) 10/2011 and its amendments. Must stand by itself, even when filled to 1/4 of its maximum volume. |
Average thickness | 0.6mm and minimum corner thickness 0.5mm. |
Fitted with |
One built-in carrying handle for the 10L type, and one or two built-in carrying handles for the 20L type, with minimum internal handle dimensions of 9 cm long and 3 cm high, with no sharp edges. The handles must resist the traction test when filled up to the top with water for 10min. Handles should not break or crack. A screwable cap with integrated tap for filling and discharge that is linked to the container by a 1mm x 120mm polyamide string. String tensile strength of 20N minimum. Strictly no leakage should be found when filled up to the top with water and after being for 10 minutes in upside down position. |
Inner diameter of the cap | Minimum 30mm for both 10L and 20L types. |
Impact Resistance / Drop Test | The collapsible jerrycan must be impact resistant on a hard smooth concrete surface when filled with maximum volume of water (10L or 15L or 20L) at ambient temperature. The complete drop test consists of 10 consecutive drops from 2m high. The jerry can must be elevated on a remote-activated rocking platform, so that the lowest point is at 2m from the ground. Test result is expressed as a product ranking according to the number of drops passed without damages or leakage. To be accepted, the jerrycan must resist to minimum 3 drops. |
Packing Information |
Each carton has 30 pieces Marking on the package must include the following details:
Do NOT include logo of the vendor. Marking must remain readable and well fixed on the box after minimum 10 handlings |
Printing of IOM Logo | IOM Logo should be printed or embossed on both sides of the jerry can. If printed, the logo should be printed by using CMYK, C = 100%, M = 82%, Y = 10%, K = 2% The size of the logo on the center of the bag should be 11 cm wide and 11.88cm cm high (or without any distortion to the logo). |
Packaging Detail | The items to be packed in Wooden EURO pallet (EUR 1) and treated as per ISPM 15 standard. Items must be shrink-wrapped, securely strapped and sealed. The packaged goods must not exceed the length and width of the pallet and clearly marked with IOM standard markings (packing details above) in both front and back. |
All IOM Non-Food Items (NFIs) have been designed, manufactured, and packaged for distribution ensuring minimal impacts on the environment. Through rigorous Quality Assurance processes along with risk and life cycle assessments, NFIs are evaluated holistically throughout their entire life cycle on their impact on the environment and for improved durability to enable reaching beyond their intended service life. Hence, reducing the need for frequent replacements. IOM NFIs can be recycled and further re-purposed or upcycled to suit multiple uses such as converting to different usage like handbags, car covers, recycled wastewater collection etc.
All unnecessary sub-packaging made of single-use plastics are avoided. When sub-packaging is exceedingly necessary, IOM prefers 100% compostable bio-plastic packaging made from biomass or unbleached, natural-coloured, recycled paper or using paper with FSC forest management certification.
Key Considerations
Acceptable Quality Limit (AQL)
Contacts
For further information, contact sheltersupport@iom.int.