Header Search (temporary)

Header Main Menu

Shelter Tool, Shovel, round point, Y handle

Last updated: 03 Oct 2022

Visión general

Specifications
Item code 4000000008
Unit weight N/A

Descripción

Shovel - Round point - Y Handle
Material Pressed carbon-steel, hardened and tempered
Corrosion protection Black paint
Quality of make No excess metal in the eye, no dents, no cracks, soft edges.
Hardness Rockwell C 35 minimum to 48 maximum HRC
Carbon content 0.4% to 0.6%
Manganese content 0.5% to 1%
Silicone 0.37% maximum
Phosphorus and sulphur 0.06% maximum
Dimensions, full piece 295 x 225mm +/-15mm
Hole diameter Front side 36mm, backside 40mm, +/-5%
Weight 1kg +/- 50g, without handle
Strength testing
  • Using a fitted, standard hardwood handle, clamp the blade of the shovel near the handle in a horizontal position. Gradually apply a load of 45kg and maintain it for 2 minutes. This should not result in any damage to the blade or a loosening of the handle, and no permanent set in excess of 25mm.
  • With one centimetre of the end of the blade secured in a clamp, move the handle back and forth 30degrees. There should be no permanent set greater than 25mm.
  • With the shovel held in a digging position, a 37mm in diameter piece of wood is hit hard against it. The blade should not buckle or break.
Handle

No chips, rough surfaces, cracks, holes or knots. Smooth, polished varnish surface. Dry, strong and flexible wood. Moisture minimum 10%, maximum 15%. Handle adapted to head so that it can be blocked and secured with a nail.

Total length 1070mm +/-50mm (head included).

The other end of the handle is made in a Y-shape with same quality of wood. The branches of the Y handle must be made of good-quality iron, securely fitted to the handle.

Contactos

For further information, contact sheltersupport@iom.int.