Visión general

Specifications
Item Code	3500000051

Kit Contents

Item	Unit	Qty
Bowl, for food, 1L, stainless steel	pcs	5
Fork, table, stainless steel	pcs	5
Frying Pan, 2.5L, used as lid for the 7L cooking pot	pcs	1
Knife, kitchen, stainless steel blade 15cm, plastic handle	pcs	1
Knife, table knife, stainless steel	pcs	5
Spoon, wooden, stirring, 30cm	pcs	1
Spoon, soup, stainless steel, 10ml	pcs	5
Cooking Pot, 5L, s. steel, dia. 22cm, with handles and lid	pcs	1
Cooking Pot, 7L, s. steel, dia. 25cm, with handles	pcs	1
Cup, s. steel, with handle, 300ml	pcs	5
Plate, deep, stainless steel, dia. 22cm, cap. 0.75L	pcs	5
Scouring Pad	pcs	1

Note:

Contents of the kit may be adapted to the context.
Specifications outlined below are based on procurement.ifrc.org/catalogue.

General comments

When ordering a kitchen set, if time allows, the composition of the set can be adapted.
All items are preferably made of stainless steel. Only one alternative is accepted:
- Aluminium cooking pots and frying pan instead of stainless steel
The specifications below indicate the minimum quality standards for stainless steel and aluminium materials.
Alternative plastic packaging, if available, can be re-used for food or water storage.

Material specifications: Stainless steel

For the tableware (plates, cups, bowls, forks, spoons and knives):

200 series stainless steels of the appropriate grades for tableware items, or
ISO type 1.4016 (American grade 430), or
ISO type 1.4301 (American grade 304).

For the cookware (cooking pots and pan):

200 series stainless steels of the appropriate grades for cookware items, or
ISO type 1.4016 (American grade 430), or
ISO type 1.4301 (American grade 304).

All the steel grades used for manufacturing the tableware items must be officially recommended by the steel manufacturer for such application. The kitchen set supplier will make available all the documents showing the origin of the steel, the steel manufacturer recommendations, and the appropriate control of the grade and the quality. The steel manufacturers must be ISSF members.
Food grade to be certified in conformity with EU regulations n°1935/2004 on materials and articles intended to come into contact with food.
Applicable standard as per publication EN 10088-1.

Material specifications: Aluminium, alternative material for cooking pots and frying pan

Aluminium type Al99,0 or above as per publication ISO 209-1 (min 99% aluminium). Other elements as per EN 602.
Publications with applicable standards:
- ISO 209-1: Wrought aluminium and aluminium alloys - alloys - Chemical composition and forms of products - Part 1: Chemical composition.
- EN 602: Aluminium and aluminium alloys - Wrought products - Chemical composition of semi products used for the fabrication of articles for use in contact with food.

Material specifications: Black steel items

Black steel, cold-hammered common mild steel.

Design of the items

Manufacturers and suppliers are invited to provide items with designs that improve the performance of the material, considering different types of design bends/veins on the pots, lids, bowls, plates, spoons, forks, knives and cups.

Kitchen Set Type B

Descripción

Cooking Pot - 7L (Frying pan lid fits)
Capacity	7 litres minimum total inner volume
Material	Stainless steel (or aluminium where specified in contract)
Diameter	Min .25cm, max. 28cm internal diameter
Thickness	Min .0.8mm in the center of the bottom and minimum 0.6mm at 20mm from the top of the wall (aluminium min 1.75mm)
Handles	Two (2) stainless steel handles, attached with leakage-proof rivets, or welded, bent upward to allow a hanging bar to pass through (aluminium handles for aluminium pots). Handles to resist to 20kg load in the normal usage position.
Lid	Refer to frying pan.
Finish	No sharp edges, food grade surface finish.

Cooking Pot - 5L - with lid
Capacity	Five (5) litres minimum total inner volume.
Material	Stainless steel (or aluminium if specified in contract).
Diameter	Min: 22cm max: 24.5cm internal diameter.
Thickness	Min .0.8mm in the center of the bottom and minimum 0.6mm at 20mm from the top of the wall (aluminium minimum 1.75mm).
Handles	Two (2) stainless steel handles, attached with strong leakage proof rivets, or welded, bent upward to allow a hanging bar to pass through (aluminium handles acceptable for aluminium pot) Handles to resist to 16kg load in the normal usage position.
Lid	Min 0.6mm (aluminium minimum 1mm) with strong durable handle /knob that resist to minimum 2kg traction.
Finish	No sharp edges, food grade surface finish.

Frying Pan - 2.5L - Used as lid for the 7L cooking pot
Capacity	2.5 litres minimum total inner volume
Material	Stainless steel (or aluminium if specified in contract).
Diameter	Adapted as a lid for the 7 litre cooking pot.
Handle	One (1)detachable steel or aluminium handle. Handle to resist to 10kg vertical load measured at 15cm distance from the inside of the pan.
Thickness	Min.0.8 mm in the center of the bottom (aluminium min 1.75 mm).
Finish	No sharp edges, food grade surface finish.

Bowl - 1L - Metallic
Capacity	1 litre minimum
Material	Stainless steel
Height	5 to 7cm
Thickness	Min. 0.5mm in the center of the bottom.
Finish	No sharp edges, food grade surface finish.

Plate - 0.75L - Metallic
Capacity	0.75 litres minimum
Material	Stainless steel
Thickness	Min .0.5mm in the center of the bottom
Diameter	24 to 25cm (must be adapted to the size of the cooking pot to be packed inside)
Finish	No sharp edges, food grade surface finish.

Cup - 0.3L - Metallic
Capacity	0.3 litres minimum
Material	Stainless steel
Handle	Securely welded. Handle to resist to 1kg pulling.
Finish	No sharp edges, food grade surface finish.

Spoon (table) - 10ml - Stainless steel
Capacity	10ml minimum
Material	One-piece stainless steel, solid.
Length	17cm minimum.
Thickness	Min. 1mm in the center of the scoop.
Finish	No sharp edges, food grade surface finish.

Fork (table) - 17cm - Stainless steel
Material	One-piece stainless steel, solid.
Length	17cm minimum.
Thickness	Min. 1.5mm at the back of the tines.
Finish	No sharp edges, food grade surface finish.

Knife - 15cm - Stainless steel blade
Material	Stainless steel blade, wood or plastic handle.
Thickness	Blade base min 1.5mm, measured at the middle of the blade.
Length	Blade 15cm usable length minimum.
Finish	No sharp edges, food grade surface finish.

Spoon, wooden, stirring, 30cm
Material	Hardwood
Length	30cm minimum.
Thickness	10mm diameter minimum for the handle
Finish	No sharp edges, no ships, no knots, food grade surface finish.

Knife, 17cm ,stainless steel (table)
Material	one-piece stainless steel, solid
Length	17 cm minimum.
Thickness	min 1.5mm at the back of the tines, must not bend to a weight of 2kg applied at the extremity of its tines when clamped horizontally at its middle
Finish	No sharp edges, food grade surface finish.

Scouring pad
Material	stainless steel wire scouring pad
Length	20g minimum

Wok - 7L - Black steel (optional)
Capacity	7 litres
Material	Black steel, protected from rust for storage.
Diameter	Min. 37cm, max. 39cm.
Thickness	Min. 1mm
Finish	No sharp edges, food grade surface finish.

Chopstick - 25cm (optional)
Material	Plastic or bamboo.
Length	25cm
Thickness	Min. 4x4mm
Finish	No sharp edges, rounded at the end.

Packing and Marking
Type	1 carton box, outer dimensions 0.3 x 0.3 x 0.25m
Height	Dimension shall be adjusted to the parcel content.
Strength	Withstands 6m-high stacking for more than 48h, and 10 handlings. The final package should resist without any damage to a weight or a pressure of 120 kg applied on a strong rigid board on top of the box.
Seal	Tape plus 4 plastic 10mm straps.
Markings	To be marked with IOM logo.
Printing of IOM Logo	IOM Logo should be printed in both sides of the box. In the 2 sides of the box that will have the logo and shipping information, the logo is to be placed centrally at 2 cm from the top edge of the box. The color of the logo should be by using CMK. C = 100%, M = 82%, Y = 10%, K = 2%. The size of the logo on the center of the bag should be 15 cm wide and 16.20 cm high.
Packaging Information	Marking on the package must include the following details: Indicate IOM Logo Item name and material code, IOM Kitchen Set – 3500000051 List of Content inside box PO number Batch number and Manufacturing date Packing units: To be marked with consecutive numbers (i.e 1/20, 2/20...) Indicate Gross Weight and Dimension Do NOT include logo of the vendor. Marking must remain readable and well fixed on the box after minimum 10 handlings.
Packaging Detail	The items to be packed in Wooden EURO pallet (EUR 1) and treated as per ISPM 15 standard. Items must be shrink-wrapped, securely strapped and sealed. The packaged goods must not exceed the length and width of the pallet and clearly marked with IOM standard markings (packing details above) in both front and back.

All IOM Non-Food Items (NFIs) have been designed, manufactured, and packaged for distribution ensuring minimal impacts on the environment. Through rigorous Quality Assurance processes along with risk and life cycle assessments, the NFIs are evaluated holistically throughout its entire life cycle on its impact on the environment and for improved durability to enable reaching beyond its intended service life. Hence, reducing the need for frequent replacements. IOM NFIs can be recycled and further re-purposed or upcycled to suit multiple uses such as converting to different usage like handbags, car covers, recycled wastewater collection etc.

All unnecessary sub-packaging made of single-use plastics are avoided. When sub-packaging is exceedingly necessary, IOM prefers 100% compostable bio-plastic packaging made from biomass or unbleached, natural-coloured-recycled paper or using paper with FSC forest management certification.

Logo placement on kitchen set's box

Consideraciones clave

Acceptable Quality Limits (AQL)

Contactos

For more information and guidance contact the Shelter Support Team: ShelterSupport@iom.int.

Kitchen set B, cooking and serving 36 pcs