Bucket, plastic, 14L, Heavy duty plastic
Visión general
| Specifications | |
|---|---|
| Item code | 4700000060 |
| Unit weight | min 780g |
| Packed volume | TBC |
Bucket
Descripción
| Bucket - Heavy duty plastic - 14L | |
|---|---|
| Description | Heavy-duty plastic bucket, with handle and lid with attached clip-on cap. |
| Manufacturing process |
Injection moulding. |
| Material |
Virgin food grade HDPE high density polyethylene, and virgin LDPE low density polyethylene OR: Virgin food grade Polypropylene Copolymer (PPCP). Should not contain toxic elements according to EN 1186-3-9 standard. |
| Dimension +/-5% |
Height: 300mm - Top diameter: 300mm - Bottom diameter: 240mm. Cover with outlet of 50mm+/- 10% and clip cap. |
| Capacity | Minimum 14L |
| Minimum weight |
Bucket 600g, cover 150g, handle 30g Minimum weight for PP: bucket 550g, cover 140g, handle 30g |
| Design |
Reinforced bottom ridge to prevent scraping of the base. Reinforced top to prevent ovalling. Curved inside base to wall join for easy cleaning. No holes, no tear, no sharp edge, smooth and clean surface finish. |
| Colour |
Bucket: white. Cover and handle: Preferably red. |
| Markings | Manufacturer identification plus manufacturing month and year molded on the bucket. |
| Lid test | The bucket filled with 14L water must resist one fall on the side without opening. |
| Drop test | The bucket filled with 14L water, must resist without damage to 2 consecutive vertical drops from 2m high from bucket bottom to smooth flat concrete floor. The bucket must be elevated on a remote-activated rocking platform, so that the lowest point is at 2m from the ground. |
| Flexibility test | The bucket must get back its original shape without damage after applying a pressure on the two sides of top rim to make them touch one another in the middle. |
| Handle test |
The handle must resists folding flat on the cover, pushed on left end, and pushed on right end. The handle must also resist to 28kg traction in normal usage position. |
| Packing | In strong carton boxes of 20 buckets and covers, with clipped-on handles. Boxes of export quality with minimum 5 ply and reinforced corners. Filled boxes must resist without any damage to a weight or a pressure of 230 kg applied on a strong rigid board on top of the box (equivalent weight to 6m high stacking). The board size to be at least 100 mm larger than the box in width and length (e.g. plywood 20mm thickness). The packing must guaranty that the buckets will not be pressed one in other to avoid blocking the buckets together |
| Marking on the boxes | Product name and quantity, plus any other requirements as per contract. |
| Printing of IOM Logo |
IOM logo should be printed on the bucket, placing it on two sides of the bucket. Logo placement guide can be referred. The color of the logo can be CMYK. C= 100%, M=82%, Y=10%, K=2%. The size of the logo on the center of the bucket should be 15 cm wide and 16.20 cm high. |
| Packaging Information |
Each carton has 20 pieces; 1 x bale of 20 pieces. Approximate dimensions: 110 x 31 x 33 cm. However packaging methods may be accepted in order to maximise load ability in pallets and containers. In strong carton boxes of 20 buckets and covers, with clipped-on handles. Boxes of export quality with minimum 5 ply and reinforced corners. Filled boxes must resist without any damage to a weight or a pressure of 230kg applied on a strong rigid board on top of the box (equivalent weight to 6m high stacking). The board size to be at least 100mm larger than the box in width and length (e.g. plywood 20mm thickness). The packing must guaranty that the buckets will not be pressed one in other to avoid blocking the buckets together. Marking on the package must include the following details:
Do NOT include logo of the vendor. Marking must remain readable and well fixed on the box after minimum 10 handlings. |
| Packaging Details | The items to be packed in Wooden EURO pallet (EUR 1) and treated as per ISPM 15 standard. Items must be shrink-wrapped, securely strapped and sealed. The packaged goods must not exceed the length and width of the pallet and clearly marked with IOM standard markings (packing details above) in both front and back. |
All IOM Non-Food Items (NFIs) have been designed, manufactured, and packaged for distribution ensuring minimal impacts on the environment. Through rigorous Quality Assurance processes along with risk and life cycle assessments, the NFIs are evaluated holistically throughout its entire life cycle on its impact on the environment and for improved durability to enable reaching beyond its intended service life. Hence, reducing the need for frequent replacements. IOM NFIs can be recycled and further re-purposed or upcycled to suit multiple uses such as converting to different usage like handbags, car covers, recycled wastewater collection etc. All unnecessary sub-packaging made of single-use plastics are avoided. When sub-packaging is exceedingly necessary, IOM prefers 100% compostable bio-plastic packaging made from biomass or unbleached, natural-coloured-recycled paper or using paper with FSC forest management certification.
Bucket dimensions
Consideraciones clave
Acceptable Quality Limit (AQL)
AQL - page 1
AQL - page 2
AQL - page 3
Contactos
For further information, contact sheltersupport@iom.int.